Roulez Électrique

OCPP Configuration for ABB Terra Charging Stations

Connect an ABB Terra AC charger to Club Roulez Électrique, step by step.

Contributed by Dave Boissonneault

OCPP Configuration for ABB Terra Charging Stations

This guide explains the exact procedure (validated in the field) to connect a residential or commercial ABB Terra AC Wallbox charging station to the Club Roulez Électrique network.

ABB Terra DC fast chargers use the same "ABB Terra" (OCPP) card in the Club, but the TerraConfig steps below apply to the Terra AC. A Terra DC is configured by the installer or ABB service.

What you need before you start

  • The "TerraConfig" mobile app (from ABB / Chargedot) installed on your phone (iOS or Android). Do not use the consumer "ChargerSync" app, because the OCPP server menu is hidden there.
  • The exact serial number of the charging station: it starts with "TACW..." and is printed on the label of the unit or shown in ChargerSync. Do not confuse it with the product/model code that starts with "6AGC...".
  • The 8-character pairing PIN, printed on the sticker of the paper manual or inside the front cover of the charging station.

Step 1 - Registration in Club Roulez Électrique

  1. Open the Club Roulez Électrique mobile app or web portal in the account of the charging station's owner.
  2. Go to "My chargers", then tap "Link a charger".
  3. Choose the "ABB Terra" card (labelled OCPP) in the list.
  4. Serial number: enter the exact serial number of the charging station (e.g. TACW123456P1234). Upper or lower case, dashes and spaces are accepted: the Club corrects them automatically.
  5. The "Name (optional)" field can stay empty. No password is asked: tap "Register".

Step 2 - Bluetooth and Wi-Fi connection via TerraConfig

  1. Turn on your phone's Bluetooth and open the "TerraConfig" app (sign in with an ABB installer/user account).
  2. Select your charging station or enter its serial number (TACW...) manually and confirm with the 8-character PIN.
  3. In the "Configurer un chargeur" (Configure a charger) menu:
    • Tap "Connexions" (Connections) and connect the charging station to the home Wi-Fi network.
    • Check that the line reads "Wi-Fi • Configuré(s)".
    • Make sure "Distribution automatique" is set to "Activé" (to allow automatic start when plugging in).

Step 3 - OCPP server configuration (the crucial detail)

  1. In "Configurer un chargeur", tap "Serveur OCPP".
  2. Turn on the "Activer le serveur externe" switch (green).
  3. At the bottom of the screen, tap "Ajouter et configurer un serveur personnalisé".
  4. Fill in the fields exactly as follows:
    • Info serveur (server info): ws://ocpp.sh/
    • The server requires a password: leave it off (grey).
    Important note: do not use "wss://" or enter a port number manually. TerraConfig automatically forces port 80 and will display "ws://ocpp.sh:80/" after saving, which works perfectly.
  5. Tap "CONFIRMER LA CONFIGURATION" to save the server.

Step 4 - Verifying the connection

  1. Back on the main "Configurer un chargeur" screen, scroll all the way down and tap the red "CONFIRMER LA CONFIGURATION" button to send all the settings to the charging station.
  2. Look at the indicator lights on the front of the ABB charging station:
    • The 1st light (at the very bottom - On/Off) is solid green.
    • The 2nd light (just above - globe/network icon) blinks green while syncing, then turns solid green once the charging station is connected to the Club server.
  3. Refresh the "My chargers" page in the Club Roulez Électrique app: the charging station status is now "Online" (green).